Keynote Speakers

Manos M. Tentzeris

Biography: Manos M. Tentzeris (S’89–M’92–SM’03–F’10) received the Diploma degree (magna cum laude) in electrical and computer engineering from the National Technical University of Athens, Athens, Greece, and the M.S. and Ph.D. degrees in electrical engineering and computer science from the University of Michigan, Ann Arbor, MI, USA. He is currently Ed and Pat Joy Chair Professor with the School of Electrical and Computer Engineering at Georgia Tech, where he heads ATHENA Research Group He has served as the Head of the GT ECE Electromagnetics Technical Interest Group, as the Georgia Electronic Design Center Associate Director of RFID/Sensors research, as the Georgia Institute of Technology NSF-Packaging Research Center Associate Director of RF Research, and as the RF Alliance Leader. He has helped develop academic programs in 3-D/inkjet-printed RF electronics and modules, ﬂexible electronics, origami and morphing electromagnetics, highly integrated/multilayer packaging for RF, millimeter-wave, sub-THz and wireless applications using ceramic and organic ﬂexible materials, 5G/6G/sub-THz interconnects, packaging and modules, 4D RF electronics and phased arrays, paper-based RFID’s and sensors, wireless sensors and biosensors, wearable electronics, “Green” and transient electronics, energy harvesting and wireless power transfer, nanotechnology applications in RF, microwave MEMs, and SOP-integrated (UWB, multiband, mmW, and conformal) antennas. He has authored more than 850 papers in refereed journals and conference proceedings, 7 books, and 26 book chapters. He was a Visiting Professor with the Technical University of Munich, Munich, Germany, in 2002, with GTRI-Ireland, Athlone, Ireland, in 2009 and with LAAS-CNRS, Toulouse, France, in 2010 and a Humboldt Guest Professor with FAU, Nuremberg, Germany in 2019.

Dr. Tentzeris was a recipient/co-recipient of many awards, including the 2024 Georgia Tech Outstanding Achievement in Research Innovation Award, the 2024 IEEE International Microwave Symposium (IMS) Best Student Paper Award, the 2023 Proceedings of IEEE Best Paper Award, the 2022 Georgia Tech Outstanding Doctoral Thesis Advisor Award, the 2021 IEEE Antennas and Propagation Symposium (APS) Best Student Paper Award, the 2019 Humboldt Research Prize, the 2017 Georgia Institute of Technology Outstanding Achievement in Research Program Development Award, the 2016 Bell Labs Award Competition 3rd Prize, the 2015 IET Microwaves, Antennas, and Propagation Premium Award, the 2014 Georgia Institute of Technology ECE Distinguished Faculty Achievement Award.

He is the Vice-Chair of the RF Technical Committee (TC16) of the IEEE CPMT Society. He is the Founder and Chair of the RFID Technical Committee (TC24) of the IEEE MTT-S and the Secretary/Treasurer of the IEEE C-RFID. He has served as an Associate Editor of the IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES, the IEEE TRANSACTIONS ON ADVANCED PACKAGING, and the International Journal on Antennas and Propagation. He has given more than 150 invited talks to various universities and companies all over the world. He was the General Co-Chair of the 2023 IEEE Wireless Power Technology Conference and Expo (WPTCE) in San Diego and of the 2019 IEEE APS Symposium in Atlanta and the Chairman for the 2005 IEEE CEM-TD Workshop and he will be the General Chair of the 2025 IEEE International Conference on Additively Manufactured Electronics Systems (AMES). He is a member of the URSI-Commission D and the MTT-15 Committee, an Associate Member of EuMA, a Fellow of the Electromagnetic Academy, and a member of the Technical Chamber of Greece. He is currently one IEEE EPS Distinguished Lecturer and he has served as one of the IEEE MTT-S Distinguished Microwave Lecturers and as one of the IEEE CRFID Distinguished Lecturers.

Webpage: https://tentzeris.ece.gatech.edu/

Zero-Power Additively Manufactured FHE-Enabled Wireless/5G+ Ultrabroadband Modules for IoT, SmartAg, Industry 4.0 and Smart Cities Applications: from dream to reality

Abstract: In this talk, inkjet-/3D-printed antennas, interconnects, “smart” encapsulation and packages, RF electronics, RFIDs microfluidics and sensors fabricated on glass, PET, paper and other flexible substrates are introduced as a system-level solution for ultra-low-cost mass production of Millimeter-Wave Modules and Metasurfaces for Communication, Energy Harvesting and Sensing applications. Prof. Tentzeris will touch up the state- of-the-art area of fully-integrated printable FHE-Enabled broadband wireless modules covering characterization of 3D printed materials up to E-band, novel fully 3D printable interconnects up to 300 GHz and cavities for IC embedding as well as fully printable structures for self-monitoring and anti-counterfeiting packages. The presented approach could potentially set the foundation for the truly convergent flexible wireless sensor ad-hoc networks of the future with enhanced cognitive intelligence and “rugged” packaging. He will discuss issues concerning the power sources of “near-perpetual” RF modules, including SG-enabled wireless power grids as well as energy harvesting approaches involving thermal, EM, vibration and solar energy forms. The final step of the presentation will involve examples from shape-changing 4D-printed (origami) packages, reflectarrays and mmW wearable (e.g. biomonitoring) antennas and RF modules. Special attention will be paid on the integration of ultrabroadband (Gb/sec) inkjet-printed nanotechnology-based backscattering communication modules, opto-RF modules as well as miniaturized printable wireless (e.g.CNT) sensors for Internet of Things (IoT), SG and smart agriculture/biomonitoring applications. It has to be noted that the talk will review and present solutions for “5S Challenges” (Scalability, Sustainability, Speed, Security and Smartness) as well as future directions in the area of environmentally-friendly transient (“green”) RF electronics and “smart-skin’ conformal sensors as well as massively scalable “tile-by-tile” RFID-enabled autonomous reconfigurable intelligent surfaces.

Joseph Bardin

Biography: Joseph Bardin received the PhD degree in electrical engineering from the California Institute of Technology in 2009. In 2010, he joined the department of Electrical and Computer Engineering at the University of Massachusetts Amherst, where he is currently a Full Professor. His research group currently focuses on low temperature integrated circuits with applications in radio astronomy and the quantum information sciences. In 2017, he joined the Google AI Quantum team and, in addition to his university appointment, he currently leads Google’s efforts to develop electronics for their current and future quantum computers. Professor Bardin is a Fellow of the IEEE and was a recipient of a 2011 DARPA Young Faculty Award, a 2014 NSF CAREER Award, a 2015 Office of Naval Research YIP Award, a 2016 UMass Amherst College of Engineering Barbara H. and Joseph I. Goldstein Outstanding Junior Faculty Award, a 2016 UMass Amherst Award for Outstanding Accomplishments in Research and Creative Activity, a 2020 IEEE MTT-S Outstanding Young Engineer Award, and the 2022 IEEE MTT-S Microwave Magazine Best Paper Award.

Webpage: https://www.umass.edu/engineering/about/directory/joseph-bardin

Building a quantum computer using microwave technology

Abstract: Quantum computing offers the potential for an exponential speed-up of certain classes of computational problems, and, as such, the development of a practical quantum computer has been a field of intense research over the past two decades. Yet, it is still early in the development of these systems, as we have just reached the point at which laboratory experiments have shown that quantum computers can outperform classical computers at certain computational tasks. As such, it is an exciting time in the field, analogous to the early days of classical computer development. As microwave engineers there is a tremendous opportunity to contribute to quantum computing, as the control and measurement of most quantum processors is carried-out using microwave techniques. In this talk, I will describe the use of microwaves in quantum computing, with a focus on the superconducting qubit technology which was used to show that a quantum computer is capable of post-classical computation. The talk will be geared toward microwave engineers with no background in quantum computing and will provide a glimpse into the fundamentals, contemporary system architectures, recent experiments, and, finally, major microwave challenges that must be overcome if fault tolerant quantum computing is to become a reality.

Stefano Maci

Biography: Stefano Maci is a Professor at the University of Siena (UNISI). Since 2000, he has been P.I. of 10 research projects funded by the European Union (EU) and by the European Space Agency (ESA). He is a Fellow of IEEE since 2004. In 2004 he founded the European School of Antennas (ESoA), a PhD school that presently comprises 35 courses on Antennas, Propagation, and Electromagnetic Theory, and 200 teachers, among them 20 IEEE Fellow. He has been advisor of 40 PhD students. He has been former member of IEEE Antennas and Propagation Society (AP-S) AdCom, the Chair of the Award Committee of the IEEE AP-S, member of the AP Executive Board of IET (UK), Distinguished Lecturer of IEEE and of EurAAP. He was recipient of several prizes and awards, among which the EurAAP Award 2014, the Chen-To Tai Distinguished Educator award 2016, of the Shelkunoff Transaction Prize in 2015, and of the URSI Dellinger Gold Medal in 2020. He is presently Director of ESoA. He has been TPC Chair of the METAMATERIAL 2020 and and General Chair of EuCAP 2023. He was the president of the IEEE Antennas and Propagation Society 2023. In the last ten years he has been invited 60 times as key-note speaker in international conferences. His research activity is documented in 200 papers published in international journals, (among which 100 on IEEE journals), 10 book chapters, and about 450 papers in proceedings of international conferences.

Degrees of Freedom of the Field and Maximum MIMO Channels as a new strategy for BTS Antenna Design

Abstract: Massive Multiple Input Multiple Output (M-MIMO) technoology has significantly advanced base station antenna design by integrating many transceivers with antenna arrays, improving network capacity and managing complex interference dynamically. Advanced antenna modeling and theory are therefore essential today for the accurate prediction and assessment of system performance of next generation of communication systems. In this paper we propose a theoretical framework that emphasizes the joint design of system algorithms and antennas using exact electromagnetic (EM) field representations. This approach defines novel parameters for the quantification of antenna array performances, and defines design strategies to maximize the number of independent channels, the average efficiency, and the maximum average gain within a specific cell. By exploring the degrees of freedom (DoF) of the EM field, we establish the physical upper bounds for system performance, providing a comprehensive understanding of antenna potential.

The paper detail the Embedded Element Patterns (EEPs), their associate Efficiency Correlation Matrix (ECM), Cell Correlation Matrix (CCM), and orthogonal field modes, discussing the practical implications of these concepts for MIMO systems. The findings underscore the significance of sophisticated antenna models in enhancing network capacity, efficiency, and reliability. This research contributes to the optimization of antenna arrays in next-generation mobile networks.

Maurizio Bozzi

Biography: Maurizio Bozzi received the Ph.D. degree in electronics and computer science from the University of Pavia, Pavia, Italy, in 2000. He held research positions with various universities worldwide, including the Technische Universitaet Darmstadt, Germany; the Universitat de Valencia, Spain; and the Ecole Polytechnique de Montreal, Canada. In 2002, he joined the Department of Electronics, University of Pavia, where he is currently a full professor of electromagnetic fields. He was also a Guest Professor at Tianjin University, China (2015-2017) and a Visiting Professor at Gdansk University of Technology, Poland (2017-2018). His main research interests concern computational electromagnetics, substrate integrated waveguide technology, and microwave passive components and sensors. He has authored or co-authored more than 190 journal papers and 370 conference papers. He co-edited the book Periodic Structures (Research Signpost, 2006) and co-authored the book Microstrip Lines and Slotlines (Artech House, 2013).

Prof. Bozzi was the 2024 President of the IEEE Microwave Theory and Technology Society (MTT-S) and he had several roles in the MTT-S Administrative Committee. He was also a member of the General Assembly of the European Microwave Association (EuMA) from 2014 to 2016. He was a Track Editor of the IEEE Transactions on Microwave Theory and Techniques, and an Associate Editor of the IEEE Microwave and Wireless Components Letters, the IET Microwaves, Antennas and Propagation, and the IET Electronics Letters. He was the General Chair of the IEEE MTT-S International Microwave Workshop Series-Advanced Materials and Processes (IMWS-AMP 2017), in Pavia, Italy, 2017, of the inaugural edition of the IEEE International Conference on Numerical Electromagnetic Modeling and Optimization (NEMO2014), in Pavia, Italy, 2014, and of the IEEE MTT-S International Microwave Workshop Series on Millimeter Wave Integration Technologies, in Sitges, Spain, 2011.

Maurizio Bozzi is a Fellow of the IEEE. He received several awards, including the 2015 Premium Award for Best Paper in IET Microwaves, Antennas & Propagation, the 2014 Premium Award for the Best Paper in Electronics Letters, the Best Student Paper Award at the 2016 IEEE Topical Conference on Wireless Sensors and Sensor Networks (WiSNet2016), the Best Paper Award at the 15th Mediterranean Microwave Symposium (MMS2015), the Best Student Award at the 4th European Conference on Antennas and Propagation (EuCAP 2010), the Best Young Scientist Paper Award of the XXVII General Assembly of URSI in 2002, and the MECSA Prize of the Italian Conference on Electromagnetics (XIII RiNEm) in 2000.

Nuno Borges Carvalho

Biography: Nuno Borges Carvalho was born in Luanda, Angola, in 1972. He received his Diploma and Doctoral degrees in electronics and telecommunications engineering from the University of Aveiro, Aveiro, Portugal, in 1995 and 2000, respectively.

He is currently a Full Professor and a Senior Research Scientist with the Institute of Telecommunications, University of Aveiro, the director of the Department of Electronics, Telecommunications and Informatics at UA, and an IEEE Fellow. He coauthored Intermodulation in Microwave and Wireless Circuits (Artech House, 2003), Microwave and Wireless Measurement Techniques (Cambridge University Press, 2013), White Space Communication Technologies (Cambridge University Press, 2014), Wireless Power Transmission for Sustainable Electronics (Wiley, 2020), Theory and Technology of Wireless Power Transfer Inductive, Radio, Optical, and Supersonic Power Transfer, (CRC-Taylor & Francis 2024) and Radio Frequency Identification Engineering How to Engineer an RFID Reader, Cambridge University Press, 2025). He has been a reviewer and author of over 400 papers in magazines and conferences. He is the Editor in Chief of the Cambridge Wireless Power Transfer Journal, an associate editor of the IEEE Microwave Magazine, and former associate editor of the IEEE Transactions on Microwave Theory and Techniques and IET Microwaves Antennas and Propagation Journal.

He is the co-inventor of six patents. His main research interests include software-defined radio front-ends, backscatter communications, wireless power transmission, nonlinear distortion analysis, and measurements in microwave/wireless circuits and systems. He has been involved in the design of dedicated radios and systems for newly emerging wireless technologies.

Dr. Borges Carvalho is a member of the IEEE MTT ADCOM, the past chair of the IEEE Portuguese Section, TC-20 and TC-11, and also belongs to the technical committees, TC-25 and TC-26. He is also the Chair of the URSI Commission A (Metrology Group). He was the recipient of the 1995 University of Aveiro and the Portuguese Engineering Association Prize for the best 1995 student at the University of Aveiro, the 1998 Student Paper Competition (Third Place) of the IEEE Microwave Theory and Techniques Society (IEEE MTT-S) International Microwave Symposium (IMS), and the 2000 IEE Measurement Prize.

Since 2024 he is a member of the IEEE Future Directions Committee, a member of IEEE TCOES, and in 2025 the IEEE Tab representative for MGA.

He is a Distinguished Lecturer for the RFID Council and was a previous Distinguished Microwave Lecturer for the IEEE Microwave Theory and Techniques Society. In 2023 he was the IEEE-MTT President.